Glenwood Canyon: Design Engineering for two (2) of the four (4) curved steel plate girder bridges consisting of one viaduct (12-130’ spans), one ramp structure (5-150’ spans), and two haunched bridges across the Colorado River (4-150’ to 325’ spans and 3-217’ to 274’ spans). Also on-site Construction Engineering for all four structures. Project Cost: $26…
Summit County, Colorado: Design engineer of four, single span bridges with Mechanically Stabilized Earth (MSE) Abutments for the Copper Mountain expansion. Unique details for a covered bridge and rails required to meet the architectural design. Contact: Yenter Companies or BTE Concrete Form Works.
Basalt, Colorado: Design engineer for a 118’-0” single span, steel plate girder bridge with custom architectural bridge railings and rustic wood deck. Contact: Hans Brucker, (970) 927-1100.
Colorado: Design engineer of 150′ long suspension bridge with dead man on one end and a unique kneebrace assembly on the other end for wetland mitigation.
Aspen, Colorado: Construction engineer for a 672 foot long, three (3) span cantilever pratt steel truss bridge. Provided a model of the entire bridge on STAAD-III computer software to determine maximum stresses during critical phases of construction. Contact: Joe Mueller, Civil Constructors, (970) 963-9755.
Glenwood Springs: Design engineer of an 80’-0” steel plate girder bridge with 28’ tall abutments for the City of Glenwood Springs, CO. Contact: Joe Kracum, Washington Infrastructure Services, (970) 928-8599.
Western Colorado: Design engineer of over 25 custom bridges in steel, concrete and wood. Designs include custom rails, MSE abutments, suspension bridges and other state of art construction methods.
Denver: Design Engineer and construction support for a ramp from I-25 to Colfax Viaduct. This included roadway, high retaining walls, the widening of two existing cast-in-place concrete structures, and a cast-in-place post-tensioned, curved, box girder ramp structure. Project Cost: $4.3 Million. Contact: John Knopp, Project Manager, (303) 757-9269 or P.K. Padhiar (303) 757-9486.
Debeque, Colorado – Design of foundations for vertical and horizontal vessels, skid mounted equipment, static and dynamic analysis of compressor rigid blocks, and pipe racks. Structural steel design for pipe racks and miscellaneous pipe supports. Baumberger and Associates, Ft. Morgan, Colorado.
Aspen, Colorado – 20,000 square foot, custom home with heavy timber trusses with precast panel exterior decks. Bill Poss and Associates, Aspen, Colorado.